VTL – MB 185 Series III

$ 22,400.00

Product Description

VTL – MB 185 Series III Signature Monoblock (pair)

Following the footstep of the MB-450 Series III, the MB-185 Series III Signature monoblock has gone through the same technological

improvements as its bigger brother. The upgrade to the Series III platform is extensive with a complete rework of the signal path and

new features added while retaining all the user friendliness of the previous model such as automatic tube biasing and

comprehensive fault sensing. Upgrades include a fully balanced differential input stage driving a differential phase splitter and

a lower impedance push-pull output stage. Also new is a shorter, faster and fully balanced negative feedback loop,

with zero global negative feedback. The negative feedback loop completely eliminates  ringing and requires no capacitor compensation

to maintain critical phase integrity and information. The result is an amplifier that remains stable even under the most demanding loads.

Another significant change to the MB-185 is the switch to EL-34 tubes. Long admired for their rich, natural and open sound,

the EL-34s bring a distinctive new sonic signature to the amplifier that emphasizes the integration and inner details of music.

The output transformer has been completely redesigned and carefully matched to complement the midrange purity and quick,

taut bass of EL34s. There is also a new user adjustable Damping Factor Feedback control that allows the user to adjust the

amplifier’s output impedance by varying the amount of negative feedback. Impedance can now be precisely set to suit the listener’s taste,

and to improve control of the loudspeaker loads to deliver best performance.

Possible settings are:

  1. LOW – Lowest damping factor, good loudspeaker control, most natural sound.
  2. MED – Better loudspeaker control, with some impact on sound quality
  3. HI – Best loudspeaker control, with a little more impact on sound quality
  4. MAX – Maximum damping factor, but sonic impact is noticeable

 

Features:

  • Fully balanced differential circuit – even single-ended signal produces balanced signal at output
  • Re-designed fully balanced differential input and driver stages for increased signal swing, bandwidth and stability
  • Zero global Negative Feedback
  • Shorter, faster feedback loop for greater tonal control without phase shift
  • Improved handling of loudspeaker loads for greater signal stability
  • The amplifier is unconditionally stable, without the need for capacitor compensation
  • Tube like JFET-type current source for lower sonic impact in single-ended mode
  • Lower impedance output stage for improved loudspeaker control
  • Dramatically increased interleaving and coupling in the balanced VTL proprietary Signature output transformer, for wider bandwidth & zero ringing
  • Variable user-adjustable DF feedback control to vary output impedance and damping factor for optimal matching to speaker load
  • Software microprocessor controlled
    • Tetrode/Triode Switchable
    • Auto Bias, Fault Sensing
    • Current in-rush limiting
    • Standby Mute function; with reduced tube current for increased tube life
  • 225 watts per channel in tetrode; 140 watts per channel in triode
  • Uses eight EL34 or 6CA7 tubes per monoblock
  • Adjustable regulated screen supply for stable operating point; discrete regulated input and driver supply for greater signal resolution and tonality
  • Adjustable precision-regulated bias supply for greater signal resolution and noise rejection and improved isolation from mains supply variations; output operating point does not change with AC power fluctuations
  • Improved Autobias and fault sensing system to operate in fully balanced differential mode; amplifier is fully protected against output tube failure; no need for precision matching of output tubes
  • All premium Mundorf silver oil caps in signal path
  • Film bypass of power supply caps for greater HF resolution
  • Extruded aluminum front panel with luxurious, modern look – black and silver options available
  • Rigid construction and improved ventilation for lower operating temperature

 

Specifications:

Vacuum Tube Complement 8 x EL34 or 6CA7, 1 x 12AT7, 1 x 12BH7
Output power 20Hz – 20kHz <3% THD Tetrode: 225 Watts, Triode: 140 Watts Into 5 Ω
Input sensitivity Variable between 1-2 V, depending upon DF setting
Input impedance 45 kΩ
Load setting 5 Ω
Output load range 4 Ω – 8 Ω
S/N ratio 225 W Tetrode & 140 W Triode: -90 dB, 120 Hz
Power consumption Idle = 270 W, Full power = 550 W
Primary mains fuse rating 100/120 V = 12 A Ceramic Slo Blo, 220/240 V = 6 A Ceramic Slo Blo
Input fuse 100/120 V = 1 A Ceramic Slo Blo, 220/240 V = 1 A Ceramic Slo Blo
Logic fuse 100/120 V = 1 A Ceramic Slo Blo, 220/240 V = 1 A Ceramic Slo Blo
B+ fuse rating Plate Fuse – 1.5 A fast acting 600 V, Screen Fuse – 0.75 A fast acting 600 V
Dimensions W x D x H 18.5 x 18 x 9 inches (47 x 45.7 x 23 cm)
Weight 38.5 kg per monoblock unpacked, 45.4 kg packed

 

 

Reviews

There are no reviews yet.

Be the first to review “VTL – MB 185 Series III”

Your email address will not be published. Required fields are marked *